Pressure Washing in Adelaide

0470 636 689

Simms Services provides pressure washing across Adelaide for driveways, paths and pavers, roofs and gutters, render, and decks and fences, matching the pressure to the surface so nothing is damaged. Not every surface wants a high-pressure blast: concrete and pavers take strong pressure with a flat-surface cleaner, but roof tiles, render and timber need a low-pressure soft wash so the surface is not stripped or cracked.

Rendered and painted walls are soft-washed at low pressure with a biocide that kills mould at the root, because a high-pressure jet cracks render and drives water in behind the coating. Driveways and paths are lifted back from grey and green to their original colour, gutters and roofs are cleared of leaf litter and lichen, and decks and fences are brought back to life ready for oil or stain.

The work is quoted by area or as a project, and the surface and access are checked before a quote is given. Home and business owners across Adelaide's northern suburbs call 0470 636 689 for exterior surfaces brought back without the damage.

GET A FREE QUOTE

Full Name *

Phone *

Short message about your needs *

I agree to terms & conditions provided by the company. By providing my phone number, I agree to receive text messages from the business.

Simms Services

Matching the Pressure to the Surface

Pressure washing, done properly, is really about matching the method to the surface rather than blasting everything at full pressure. Concrete driveways and pavers can take high pressure and a flat-surface cleaner, but roof tiles, render, painted surfaces and softwood timber will crack, etch or strip if the same pressure is used on them.

That is why the crew soft-washes the delicate surfaces, using low pressure and, where needed, a biocide that kills mould and lichen at the root rather than just stripping the top layer. Adelaide's long dry spells leave a baked-on film of dust and traffic grime, and the shaded southern walls, north-facing roofs and damp fence lines then grow the black and green mould that makes a place look tired.

Driveways, paths, pavers, pool surrounds, retaining walls, roofs, gutters, render, decks and fences all fall under this work, and each has its own correct pressure and technique. Simms Services checks the surface, its condition and the access before quoting, because a soft-washed render job and a high-pressure driveway are completely different jobs.

Getting the pressure right is the whole point: the aim is a surface brought back to its original colour, not one left etched, streaked or damaged. The scope is agreed up front so the quote covers exactly the surfaces being cleaned.

Simms Services

Driveways, Paths and Pavers

Hard surfaces are where high-pressure cleaning earns its name, and a driveway is usually the biggest visual win on a property. Concrete driveways, aggregate, brick and stone pavers, paths and pool surrounds are cleaned with a flat-surface cleaner that spins the water evenly, so the result is a consistent clean rather than the zebra-striping a hand wand leaves.

Years of tyre marks, oil spots, dust, moss and the grey weathering film are lifted, taking the surface back toward its original colour. Oil and rust stains are pre-treated with the right product before washing, because pressure alone will not shift a soaked-in oil patch.

Sand-filled paver joints are re-sanded after cleaning where needed, so the pavers stay locked and level rather than loose. Pavers and exposed aggregate are washed at a pressure that cleans without blowing out the surface or the joints, which is a common mistake with a hired machine.

The runoff is managed so slurry is not pushed straight into a stormwater drain, in line with the local rules. A driveway and entry path are the first thing a visitor sees, so this is often the job that lifts a whole street frontage.

Simms Services

Roofs, Gutters, Render, Decks and Fences

The delicate surfaces are where technique matters most, because the wrong pressure does real damage. Roofs are soft-washed rather than blasted, because high pressure on tiles or metal strips the protective coating, forces water under the laps and can crack a tile, so a low-pressure wash with a biocide is used to kill lichen and mould at the root.

Gutters are cleared of leaf litter, silt and debris, which protects against overflow and is worth doing before winter rain and in the lead-up to fire season. Rendered and painted walls are soft-washed at low pressure, because a high-pressure jet cracks render, drives water in behind the coating and strips paint, so a biocide does the work on mould and lichen instead of force. Shaded southern elevations hold that growth longest, so those walls are treated first and rinsed last.

Timber decks and fences are washed at a controlled pressure that lifts grey weathering, mould and old grime without furring or gouging the timber, leaving the surface clean and ready to re-oil or stain. Colorbond and rendered fences are soft-washed so the coating and the render are not damaged.

Each of these surfaces is quoted with its correct method noted, so a client knows a roof is being soft-washed, not blasted. Matching the pressure to the material is exactly what separates a professional job from a hired-machine one.

Simms Services

What Pressure Washing Costs in Adelaide

Pressure washing in Adelaide is usually priced by the area cleaned or as a project, and Simms Services quotes it that way so the number matches the surface and its condition. As a guide only, area-based pressure washing runs about $3 to $5 per square metre for most jobs, with the wider range spanning roughly $1.50 to $5 depending on the surface and how heavy the build-up is.

Smaller or variable jobs are sometimes charged hourly at around $120 to $180 or more, which reflects the cost of running commercial equipment, and large commercial projects are quoted as a whole, commonly from around $500 up to $4,000 or more.

Those figures are an indicative guide, ex GST, and every job is confirmed on site or from clear photos before it starts, because condition changes the work as much as area does. A lightly dusty driveway and a moss-covered one of the same size are very different jobs.

Soft-washing a roof, re-sanding paver joints, pre-treating oil stains and access all move the figure. A home or business owner gets the price in writing on 0470 636 689 before any work begins. Bundling several surfaces into one visit, such as a driveway, paths and a fence together, usually works out better value than booking each separately, because the equipment is already set up on site.

Simms Services

Why Adelaide Chooses Simms Services for Pressure Washing

People regret a pressure-washing job when a driveway is left striped or a roof is damaged by too much pressure, and Simms Services is set up to avoid both. The pressure is matched to the surface every time, so concrete is cleaned hard, roofs and render are soft-washed, and timber is washed at a controlled pressure rather than a gouging blast.

A flat-surface cleaner is used on hard surfaces so driveways come up evenly instead of streaked. Runoff is managed in line with the local rules, so slurry is not pushed into a stormwater drain. The job is quoted by area or as a project and confirmed in writing, so there are no surprises.

For a property with more than one need, the crew also handles window cleaning across Adelaide, property maintenance for grounds and repairs, and strata cleaning including car park and common-area washdowns.

For exterior surfaces brought back without the damage, call 0470 636 689.

TESTIMONIALS

What Our Pressure Washing Customers Say About Us

The Process

3 Step Process For Your Pressure Washing Needs

Get Quoted

Call or message with your address and what needs doing. We measure the job, confirm the scope, and send a fixed written price.

We Clean

We turn up in the booked window with our own gear, water and power, and work through the agreed scope properly.

You Check

We walk you through the finished work before we leave. Anything not right gets fixed on the spot, not argued about later.

Pressure Washing In Parafield Gardens

FREQUENTLY ASKED QUESTIONS

Everything you need to know about our Pressure Washing In Parafield Gardens

How much does pressure washing cost in Adelaide?

Pressure washing is usually priced by area or as a project. As a guide only, most jobs run about $3 to $5 per square metre, with the range spanning roughly $1.50 to $5 depending on the surface and build-up. Smaller jobs are sometimes charged hourly at around $120 to $180 or more, and large commercial projects are quoted whole from about $500 up. Those figures are ex GST and confirmed on site; call 0470 636 689 for a quote.

Can you pressure wash solar panels?

Solar panels should not be cleaned with a pressure washer. High pressure can crack the cells, force water past the seals and void the manufacturer's warranty, so panels sit outside what Simms Services takes on. A specialist panel cleaner working with deionised water and a soft brush is the right call, and saying so up front saves a wasted visit. Roofs around an array are still soft-washed, with the panels themselves left untouched.

Will pressure washing damage my roof tiles?

It can, if the wrong method is used, which is why roofs are soft-washed rather than blasted. High pressure on tiles or metal strips the protective coating, can crack a tile and forces water under the laps into the roof space. A low-pressure soft wash with a biocide kills the lichen and mould at the root and cleans the roof without that damage. The method is always matched to the roof, and it is noted on the quote.

Do you clean driveways without leaving stripes?

Yes, driveways are cleaned with a flat-surface cleaner that spins the water evenly across the concrete or pavers, which avoids the zebra-striping a hand wand leaves. Oil and rust stains are pre-treated first, because pressure alone will not shift a soaked-in stain. Paver joints are re-sanded after cleaning where needed so they stay locked. The result is an even, consistent clean back toward the original colour.

What is the difference between pressure washing and soft washing?

Pressure washing uses high water pressure to clean hard surfaces like concrete driveways and pavers. Soft washing uses low pressure with a cleaning solution or biocide to safely clean delicate surfaces like roof tiles, render, painted walls and timber, where high pressure would cause damage. Choosing the right one is the whole skill: the same machine can restore a driveway or wreck a roof depending on how it is used. Each surface on a quote has its correct method noted.

Do you manage the water runoff and mess?

Yes, runoff is managed so slurry, oil and debris are not simply pushed into a stormwater drain, in line with the local rules. Loose debris is collected, and the area is left tidy rather than covered in the grime that was just removed. On commercial sites where containment is required, that is built into the plan before the job starts. Leaving the site clean is part of the job, not an afterthought.